Tuesday, March 18, 2014

the cat in the hat mini hats

A couple of factors played into the lack of activity at the blog over the past couple of weeks. First, I was scrambling to finish up the last few costume projects before our preschool's all-parent production of The Cat in the Hat. A few late nights, some scavenging for materials, and a couple of re-dos later, and everything came together. It was a pretty amazing group of people who came together on the project.

Second, my computer died. Like, completely. I took it in with a blank white screen with only a gray apple in the middle, and when it came back to me a little over a week later, they'd replaced the hard drive and the logic board. Thankfully, luckily, magically, there was a week left on the AppleCare extended warranty the Mr. had the foresight to buy. A week later, and we'd have been paying out-of-pocket for the parts and repairs. And it would have cost about as much as I earned on Etsy this year. I feel really lucky.

Anyway, on to today's post.


Let's look at making some Cat in the Hat mini hat headbands!

You can use this idea for making any kind of mini top hat, really, just by changing the color of the stiffened felt and adding some embellishments. Here's what you need to know.

Materials for two hats:

1 12 x 18-inch piece of stiffened felt (also called Friendly Felt) in white or glittered white
2 9 x 12-inch pieces of regular red felt or glittered red felt
red and white thread
hot glue
2 red ribbon-covered headbands


For each hat, cut a piece of stiffened white felt that's 4 1/2 x 12 inches, and three red stripes that are approximately 1 x 12 inches. You'll also need a red circle that measures approximately 3-inches in diameter, and two stiffened white circles (not one red + one white, as photographed) measuring approximately 4 1/2 inches in diameter.

Arrange stripes as shown, then stitch in place using red thread.

Using the red circle as a guide, pin the striped felt into a tube that will use the red circle as a top. You can either pin it inside out to machine stitch and turn carefully right side out again, or you can pin right side out and hand stitch using a mattress or a slip stitch. Both ways will work.
 
After pressing that seam to make sure the tube retains its round shape, sew the red circle to the top using red thread to whip stitch it in place.


Center the hat's top on one of the white circles, then use red thread to whip stitch it in place.

Hot glue the hat to a headband, then cut slots on either end of the remaining white circle to accommodate the head band (as photographed).


Line the circle up with the underside of the hat and the headband, then hot glue in place. Make sure to use lots of glue on the headband, and a scant amount of glue on the white felt so that it doesn't leak through. Then whip stitch to the hat and you're done!

Use similar materials for Mad Hatter or steam punk style hats! Switch to black or brown felt and headbands, and add feathers, ribbons, and other embellishments. And then send me a link so I can see what you've made!

Thanks for reading!

p.s. you can make these photos larger by clicking on them for more detail!