finishing up our fix-it felix costume

If you're following along with the Fix-It Felix costume tutorials, you can find the golden hammer tutorial here, the cap here, the shirt/name patch tutorials here, and the glove tutorial here. Here on in, I'm going to cover the boots, pants, and the tool belt.

We lucked out and found a pair of pre-schooler-sized work boots in my kiddo's size at a thrift store for a couple of bucks. Maybe it's because we live in the Northwest; there were three similar pairs in different sizes on the shelf the day we found these. I highly recommend checking thrift stores for these before you buy something new, especially if the work boots are going to be semi-retired after Halloween.

The laces were shredded, so I replaced them. A new pair cost around $2 from Target. I know tons of other stores carry them for a similar price. Also, to help you pick the right shoelace length, count how many pair of holes your boot have. There'll be a guide on the rack or the back of the package to tell you the correct length. Handy, right?

The jeans are just as easy. If you don't already own a pair, these are super-easy to thrift. Go for straight legs in a dark finish to most closely resemble the movie. Then, just roll the cuffs for a perfect match.

The Tool belt

On to the tool belt!

I'll save you the trouble of my silly repetition and link you here to the Two Little Hooligans toddler tool belt tutorial. I used her measurements but made some changes to build my kiddo's tool belt. To start, I used a piece of painter's tarp to make mine.

I made my hammer first, then I measured around it and added four inches to determine the size of the hammer loop. This seemed to me to be the very best way to make sure the hammer would later fit inside the hammer loop.

I simplified the pockets by leaving off the second tool loop and attaching the pockets directly to the belt instead of using the sliders Christina recommends on her blog.

I decided it would be a good idea to dye the tool belt before attaching a buckle so that the dryer wouldn't do what the dryer does when heavy metal buckles go in. 

I used the same combo of Dylon's Sunflower and Terra Cotta dyes that I used on the first pair of cotton gloves in yesterday's glove tutorial. If I had this to do over:I'd have dyed the fabric first, and sewn the tool belt second. I really liked the structure of the belt better before it went through the wash.

The Hooligans tutorial uses a plastic buckle, I wanted to use a metal buckle. I saved some money and got a sweet looking buckle by buying an old leather belt at St. Vinnie's.

If you decide to use a recycled belt buckle, check the back of the belt; some use snaps so you won't even have to cut into the leather.

After checking my kiddo's waist measurement, I stitched the buckle onto the belt, punched a hole, and done!

And that's it, all done! Thanks for hanging in there for all of the many posts. Good luck and happy Halloween!

freezer paper stencil viking t-shirt

I had a falling out with the owner of a local shop recently. I'd gone there to buy a specific t-shirt for my kiddo, one with a cuuuute viking pattern screen printed on it by a company I like, but can't always buy (because good sense dictates that I don't buy too many $30 toddler t-shirts).

But I left without it.

It's all too bad because I like to support local business when I can (even if it means waiting for a sale) and I especially like to support mama-owned businesses. More than that, I like to support good graphic designers, and this particular clothing manufacturer hires great ones.

In the end, though, the idea of stenciling a viking design onto a t-shirt isn't copyrighted. In fact, this tutorial that Cheri wrote over a year ago could have inspired the (more recent) designer t-shirt, for all I know. I know it inspired me!

Freezer paper stenciling is something I've posted about before, but this viking design is a whole lot less complex. As you can see, I made it in two different sizes, one for the mister and one for the kiddo.

I also (word to the wise) accidentally cut it into wax paper the first go-around (which DOES NOT WORK, and I knew it) and had to re-do it, so it's a good thing it's so straight-forward.

Cheri mentions in her tutorial that you can find some free-use images on-line and cut them with your Silhouette cutter; you'll be happy to know you can also free-hand the drawing and cut it out with a craft knife if, like me, you're artsy and don't own a Silhouette. You can see my pencil lines on the paper in this next photo.

Cut on FREEZER paper, iron onto t-shirt (plastic side down), paint, and let dry.

If your beard is too close to the color of your shirt, lighten it up, dry again, and remove the wax paper.

Heat set, and you're ready to go!

I used a Gap t-shirt from the Goodwill for this design, so the project was really inexpensive and fast. And we like it! I hope you'll link to your freezer paper stencil projects in the comments section below, if you have the urge!

Happy New Year, and thanks for reading!