re-working adult gloves for kids' halloween costumes

For the gloves for my kiddo's Fix-It Felix costume, I came up with several options.

Felix's gloves are solid tan in color, probably meant to mimic this pair, made of pig skin. I didn't order them because (a) they're too big; (b) locally, I found a pair but they cost $21; and (c) my aunt used to have a pet pig. He was really smart.

I searched for alternatives, and eventually found a pair of plain-colored cotton canvas work gloves at the thrift store for 99 cents. Dyed (with a combo of Dylon's Sunflower and Terra Cotta colors), they came out pretty close to the color I wanted. Still too large, but at least close to the right color.

But then I happened upon a pair of flannel work gloves that were even closer in color, except for the cuff.  They were also softer and more pliable, so I went for it. Note: this photo was taken after the fingers had already been shortened, as explained in the next step.

To shorten the fingers of adult-sized gloves: first turn them inside-out, then try them on the person meant to wear them. Mark where the fingers will end on the new-and-improved version (leaving a little room for the seam allowance) then stitch, cut off the excess fabric, and turn right-side out.

Next, remove the non-matching cuff by pulling out the stitches with a seam ripper.

Zig-zag the raw edge, then give it a very narrow hem.

Finish the glove with a band of 1/4-inch elastic stitched in place about an inch from the new hem.

And you're finished! Below is a photo of the finished gloves on my fully-costumed kiddo, holding Felix's gold hammer. (You can also see a bit of the tool belt, which I'll be talking about in the final Fix-It Felix blog post tomorrow.)

This will work on any gloves made of woven cloth. You may even have good success on gloves made of knit fabric, if you zig-zag the ends of the fingers to prevent them from unraveling. Leather, though, might be trickier, depending on the thickness and stiffness of the leather.

Tomorrow will be the last in this series, featuring the tool belt, pants, and boots, so come on back if you're trying to finish up a Fix-It Felix costume of your own by the time the weekend is over!

Need to find the other costume tutorials fast? Click here for the shirt and name patch, here for the magical golden hammer, and here for the cap and double-f patch.

Thanks for reading!